Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Autotransformer needed! Compatible with a Progressive Hard Wired EMS?

jameswbarton · 09-05-2018, 08:59 AM

Thanks Mr Fireguy but your reply did not address using a Hughes autoformer wit a Progressive EMS 50 amp hardwired system. On this instance all the damage was caused by long term low voltage at the supply pedestal which the park has refused to fix for years. The park is wired as many are with 6 Pedestals on a single breaker. I am the furthest from the breaker panel. In discussing this with my neighbors they all had similarvdamage and had installed autoformers which now make my problem worse. My Progressive does its job but yo-go's the power on and off frequently as it is designed. It does not help in my constant low voltage for days at a time. A Master electrician installed the EMS and tightened all the wiring Keystone left loose at manufacture. This us a typical low voltage park issue that my only option is to install an autoformer as others have done or move.

09-05-2018, 08:59 AM	#6
jameswbarton Montana Fan Join Date: May 2016 Location: Massillon Posts: 437 M.O.C. #18658	Thanks Mr Fireguy but your reply did not address using a Hughes autoformer wit a Progressive EMS 50 amp hardwired system. On this instance all the damage was caused by long term low voltage at the supply pedestal which the park has refused to fix for years. The park is wired as many are with 6 Pedestals on a single breaker. I am the furthest from the breaker panel. In discussing this with my neighbors they all had similarvdamage and had installed autoformers which now make my problem worse. My Progressive does its job but yo-go's the power on and off frequently as it is designed. It does not help in my constant low voltage for days at a time. A Master electrician installed the EMS and tightened all the wiring Keystone left loose at manufacture. This us a typical low voltage park issue that my only option is to install an autoformer as others have done or move.