|
My Whirlpool fits tight in the old opening and I had to sand down the existing wood frame/trim where the Whirlpool "bulged" a little in the middle. I have one lag bolt through the rear frame at the back. Wheels are still in place. Usually the top of the Fridge creeps/tilts out just a little after going down the road. I just push it back in.
Used wood to cover the opening at the bottom inside the RV as the residential sits up from the "floor" and re-used the old Dometic top plate at the top. On my Fridge the coils are all at the rear so I put insulation above and below the Fridge. Also re-used the little computer style cooling fan, but I've NEVER heard it run.
|