[Forsch]

So I finally was able to look at the intake vents. Wow. The ducting was collapsed to about 1/2 inch both in the living room and the bedroom. I used a piece of 1 1/2 inch PVC as recommended in an earlier post to open the duct. You could feel the difference in the exit pressure of the A/C vents. When I checked the intake vents in the bedroom I was amazed to see that the opening cut by the factory was only about 1/2 of the size of the vent covers. I was amazed at how little air was exiting the A/C vents in the bedroom. I cut the intake opening to match the size of the vent covers and re-taped them with aluminum tape. Again, what a difference in the output pressure of the A/C vents.

If you are having any issues with your A/C not moving enough air, I would definitely recommend checking these two things. They are very easy to correct and don't take much time.

Third A/C will be installed this Friday. Dometic Blizzard NXT. I will comment on that after it is installed.

Now to adding more output vents to the bedroom ceiling...