If you have wheels similar to mine … they will have a small valve stem recess hole bored in the rim. I'm not talking about the valve stem hole itself … the recess hole in the aluminum rim that the valve stem sticks out of. My hole diameter was too small for the traditional metal stems that have a nut on both sides of the rim. I had to go with the Enkei style metal valve stems that have the nuts both on the inside of the rim. This is just a link to see the design I'm talking about … you'll have to know your hole diameter in the rim for your current valve stems before you get metal ones. Either .453" or .625"
https://www.amazon.com/Enkei-A379-VA.../dp/B00I5DMG7E