|
After years of troubleshooting/fixing airplanes, I usually look at the last thing that was done before the problem started.
Did everything work before you had your new brakes put on?
"keep getting the message SC on the brake box"
Does SC mean "short circuit "?
I have read other threads where they have found the brake wire shorted inside the drum.
I wonder if you can disconnect/reconnect one wire at a time in the 4x4 pin junction box until the error goes away? I'm not sure if this is possible or easy to do. I understand the wiring is pretty tight inside the box.
If you can do it I would start with the blue brake wire.
|