[h2ojocky]

I just repaired my galley tank. I had to pull down some of the chloroplast underbelly. I removed the panel above the axles and pulled the one behind that partially down. You won't need to remove the panel behind the axle like I did. While I was investigating I noticed that the brace that held the galley tank had a cracked/broken weld. During welding some slag fell on my hydraulic lines so I had to replace them also. I watched some YouTube videos on how to do it. I mixed ABS cement with ABS shavings and applied over screen door mesh. The repair was much easier than R&R of chloroplast.