|
Although by no means quantitative it will give you an idea of what you have. With your fiver as level as can be, take a carpenters level and place it vertically on the outside of your tires ... both sides should be slight bubble out at the top more so on the street side. This will give you an idea of what you have. Like I've mentioned before, mine were a slight bubble in (negative camber)straight from the factory. Again in general terms, wearing the tire only on the outer edge ... too much camber. Wearing on only the inside edge ... to little camber. Feathering the entire face of the tread ... too much or too little toe. I'll stop at over and under inflation signs as not to muddy the water.
|