[Option 65]

Very much appreciate all responses.
Problem is happening on shore power. I haven’t tried on truck power or stand alone. Battery voltage never drops below 12.3 volts.
I have checked all electrical connection to the pump and all others even remotely associated.
I have checked all hydraulic fitting connections.
No loose connections found anywhere.
Fluid level in reservoir is at proper level.
I did put a DC amp-meter on the battery during operation. During any “extend” function the pump it will read 15-20 amps until the end of any cylinder stroke at which time it jumps up to over 40.

During any “retract” function, the pump pulls 6-12 amps until the cylinders come to the end of their travel at which time the pump drops down to under 2 amps and never does “strain”.