Quote:
quote:Originally posted by oldelmer1
I was taking some things out of the camper, and I thought I would turn the cutoff switch for the battery. After finishing removing stuff, I went into the camper and noticed the WELCOME HOME light came on as I opened the door. Propane sniffer light on and everything else worked too.
Checked the switch and it was off, key out, but everything still works.
Pulled the switch out of the wall and checked with a volt meter, yup, power on both sides of the switch.
Do these things go bad???
|
My first question is, Was the unit plugged into 120VAC when you did this test?
If yes then the convert was still providing 12vDC to the fuse panel.
If you were not plugged in then there should be 12vDC on only one leg unless the switch is bad.
Hope this helps.
Let us know what you find.