|
There is plenty of room to put a drawer there. I put one there on my 2011 3400RL. Make a box with drawer guides that fits there, then screw the cover panel you took off the opening on the front of the box. The question was, what to do about the screw holes on the front of the panel. Before I screwed the panel onto the box, I cut plugs from the back of the panel that I pluged the holes with. I think I also had to route a similar profile on the edge of the panel as the other drawers have. Then I sanded the face of the front down, stained and finished it. We store flat kitchen items there.
Good luck
Walt
|