Quote:
quote:Originally posted by NCFischers
If you retract the legs until the motor lugs down, you will blow the fuse. I put a piece of white tape around the leg so I know when I'm getting close to the top. I stop the legs about a quarter of an inch from the tape and haven't blown a fuse since.
|
Yes, I have the legs marked with a black paint stripe.
The slides will blown the fuse upon complete retraction also. Yes, as I said in the post I am aware of lugging the motor down.
I am going to try the simple solution first of changing the fuse to 40 amps then go from there. In '02 factory recommended changing a fuse from 30 to 40 amp on jack system solved same problem in a diesel pusher we had. The reset breakers sound like the ultimate fix. Also am going to call Keystone about the 60 amp fix also.
Thanks to all your suggestions. I will update the fix as time passes.