|
It is the Armstrong Exquisite floating vinyl. Just peel the tape and overlap the planks. I used a carpet knife and straight edge to make the cuts. Merely cut the finished side, break the plank over, and finish the cut. If you stick it down and need to adjust, just peel it up and re-do it. This was one reason for the vinyl, was ease of installation.
We left the carpet in the slide out. I've seen a couple with laminate, and I don't like the transition from the slide to the main floor. We will have new, hopefully a better grade carpet installed in the slide. We ran the vinyl up under the carpet on the edge of the slide and stapled that edge. Our main slide lifts probably 3/4" over the floor when retracted.
|