[BB_TX]

Edit: For some reason, my first attempt at a response to this topic came out under Carlson's name. Strange. Site was acting strange at the time. Maybe admin can delete it.

I did lube mine using the EZ lube fittings per the instructions with no problem. And I did jack up one wheel at a time just barely off the ground.
Anyone who saw me probably thought I was nuts. I was sitting on a block of wood using both hands on the grease pump and one foot up in the air keeping the wheel continuously turning while I very slowly pumped grease into the fitting until I saw new grease come out the front.
I checked the brakes a couple months and a couple thousand miles later by again jacking up one wheel at a time, pulling the breakaway switch, and finding that each wheel would lock up after less than a quarter of a turn.
Others apparently have not been as fortunate.