Mailmanguy, if you cannot see where the oil is going, you might have the same problem we had. Our leak was at the swivel on the hose that connects to the hydraulic cylinder under the bed. To get to it you have to remove the safe (if yours is under the bed) - 4 screws inside the safe, if I recall), then remove the two screws holding in the plywood base. Lift the plywood out and you can get to the hydraulics. Ours was dripping into the tray under the cylinder so we had no oil on the carpet under there. Here's a couple of pictures to show you what I'm talking about. Of course, yours may be leaking somewhere else.
