|
I knew it! I knew it!! I knew it!!!
You have finally proved it!
But I figuired Glenn would of had the problem!!!
Bill, what you need to get is Rid-X or if you can find a quicker acting Rid-X, and put it in the tank and it will eat away at your blockage.
If you have the blank cap with a hose fitting on it, take a double female hose contector and the blow out fitting that you use to blow out the air lines.
With low air pressure just put pressure on the blockage with the valve open.
Also a swedish question, does you valve open up when you pull it all the way, the handle came off the galley tank on the way up to MN.
Good luck and remember what goes in will finally come out, don't wear good cloths or new sneakers, and have two 5 gallon buckets, or make sure that you are inside and Ann is outside.
E. Sven and Pat
|