Quote:
Originally Posted by Coug60
A friend of mine brought up Altitude...
Has anybody had issues with Altitude with there furnace? I was boon-docking at about 10600ft and my home is at almost 7kft.
I wonder if my gas regulator in the furnace needs an adjustment for altitude.
|
My post #8 above.
If your burner actually fires then shuts off, repeat, the manual calls that "Limiting".
I would suspect Limit switch, flame sensor and control board.
The flame sensor is integrated with the sparker
Flame sensor testing
You can jumper the limit switch for troubleshooting.
Lots of good YouTube videos.