Quote:
Originally Posted by Foldbak
Out of stroke simply means that one or more of the landing legs have extended as far as it can and the trailer isn't level. Typically you would retract all and add blocks. You should be fine. In your case if you're only able to extend the legs 5 or 6" then you probably need to reset.
You should download the lippert now app on your phone.
https://support.lci1.com/ground-cont...ol-touch-panel
Here's how to reset
Turn the power to the system OFF.
Press “Front” five times.
Press “Rear” five times. At this point the panel will read “ZERO POINT CALIBRATION” and all lights (front, right, left, rear) will flash.
Press ENTER to reset the auto level control.
Good luck
|
Make sure your batteries are fully charged as I found out a slightly low battery will cause all kinds of wierd happenings.