Quote:
Originally Posted by RMcNeal
You'll have to provide 12 volts to both the reversing solenoid and the appropriate hydac valve to extend or retract the slide. I downloaded a really good troubleshooting doc from this forum some time ago that will show you what you need.
Take a look at this thread...
https://www.montanaowners.com/forums...ad.php?t=84598 |
Thanks for the link to the thread. I don’t have hydac valves on my old rig — just the 4 position manifold with screws that you manually screw in or out to select the slideouts. So since I don’t have to worry about 12v to the hydac valve, I should be able to just make a remote by clipping the center of my toggle to the 12V on the motor and then the two sides of the toggle to each of the spade connectors.