|
We installed wet bolts and cleaned/packed the wheel bearings last year. Not the same job, I know, but we lifted our 2013 343RL completely off the ground. I did it by lowering the landing gear completely and putting 8" cement blocks on edge under the frame fairly close to the back of the rear tires. Then raised the landing gear all the way up and put the blocks under the frame just in front of the front tires. Did that a couple times and put a 2x on top of the last blocks. I used a floor jack under the frame as needed to move the axle. We were'nt going to do this in an afternoon, so I wanted something very stable. Worked well for us.
|