Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

Ronda3733 · 01-20-2019, 03:25 PM

[QUOTE=capras801;1129658]Has anyone tried CARAVAN SENSOR CLEANER to clean black and grey tanks? What were the results?[/Q

I have a 2018 Montana 5th wheel, this is the 4th trailer I have had in the last few years. Of course the Sensors on the tanks failed in 2 weeks..
I replace them with GARNET SENSORS.. These sensors go on the outside of the tank. they show the tank level in digital numbers..like 20% 30% .
the hard part is getting to the tanks, my Montana has liner under the
tanks. these are really easy to install, the Garnet senors are strips
of a fiberglass material 12 inch high and about 2 inch wide. they have a 3 M adhesive on the back and they will not fall off once installed.
I put my new Garnet monitor inside my past thru bay .
they only have to wires so its easy to set up.
If you get one get the blue tooth unit.
this is get for you can check you tank level on your I phone any where with in 50 feet
of the trailer. or you can check the monitor in the past thru. You can leave you old sensors on..
the reason I put the Garnet monitor in past thru is I didn't to put it in the panel box in the trailer. I use the blue tooth on my I phone to check the
tank level when I am in the Trailer and use the monitor in the past thru
when I am filing or empty the tanks.
The Garnet Sensors unit between $200 and $350 .
Garnet is Sold in Texas and made in Canada.
I have tried just about every Sensors out there in the last few years
and this is the only one that work all the time, I have had it a year.
You can cut the Sensor to fit you tank size. I set my where when its empty
it start out at 5 % that way when the Garnet monitor Says it at 100 %
I am really only at 95 %. Nice... never have to worry about tank
overflow. also don't to wonder if I empty the tank a day ago or 4 days a go. also it has a alarm on you an hook up to let you know when its time to empty.
I never write reviews, but this one is the real deal.

01-20-2019, 03:25 PM	#10
Ronda3733 New Member Join Date: Jun 2018 Location: PEORIa Posts: 8 M.O.C. #21954	Tank sensors [QUOTE=capras801;1129658]Has anyone tried CARAVAN SENSOR CLEANER to clean black and grey tanks? What were the results?[/Q I have a 2018 Montana 5th wheel, this is the 4th trailer I have had in the last few years. Of course the Sensors on the tanks failed in 2 weeks.. I replace them with GARNET SENSORS.. These sensors go on the outside of the tank. they show the tank level in digital numbers..like 20% 30% . the hard part is getting to the tanks, my Montana has liner under the tanks. these are really easy to install, the Garnet senors are strips of a fiberglass material 12 inch high and about 2 inch wide. they have a 3 M adhesive on the back and they will not fall off once installed. I put my new Garnet monitor inside my past thru bay . they only have to wires so its easy to set up. If you get one get the blue tooth unit. this is get for you can check you tank level on your I phone any where with in 50 feet of the trailer. or you can check the monitor in the past thru. You can leave you old sensors on.. the reason I put the Garnet monitor in past thru is I didn't to put it in the panel box in the trailer. I use the blue tooth on my I phone to check the tank level when I am in the Trailer and use the monitor in the past thru when I am filing or empty the tanks. The Garnet Sensors unit between $200 and $350 . Garnet is Sold in Texas and made in Canada. I have tried just about every Sensors out there in the last few years and this is the only one that work all the time, I have had it a year. You can cut the Sensor to fit you tank size. I set my where when its empty it start out at 5 % that way when the Garnet monitor Says it at 100 % I am really only at 95 %. Nice... never have to worry about tank overflow. also don't to wonder if I empty the tank a day ago or 4 days a go. also it has a alarm on you an hook up to let you know when its time to empty. I never write reviews, but this one is the real deal.