Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 05-19-2018, 02:16 PM

You have to glue down the various pieces with a good adhesive and then use the self leveling sealant to cover the joints where the rubber roof material was torn. If the rubber membrane is no longer stuck to the roof anywhere, then make a long cut front to back and use the adhesive to re-bond it, then when dry use the self leveling to seal that new joint. By looking at the picture it needs a new roof, but I also understand that there is no money to do that. At this point "pretty" is not a concern, but sealing against water intrusion is. Maybe the MOC community can look into how we fellow montana owners could "CROWD FUND" you a new roof on this forum site. A few dollars from a lot of the members could get you that new roof! John

05-19-2018, 02:16 PM	#2
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	You have to glue down the various pieces with a good adhesive and then use the self leveling sealant to cover the joints where the rubber roof material was torn. If the rubber membrane is no longer stuck to the roof anywhere, then make a long cut front to back and use the adhesive to re-bond it, then when dry use the self leveling to seal that new joint. By looking at the picture it needs a new roof, but I also understand that there is no money to do that. At this point "pretty" is not a concern, but sealing against water intrusion is. Maybe the MOC community can look into how we fellow montana owners could "CROWD FUND" you a new roof on this forum site. A few dollars from a lot of the members could get you that new roof! John __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.