Montana Owners Club - Keystone Montana 5th Wheel Forum

Montana Owners Club - Keystone Montana 5th Wheel Forum (http://www.montanaowners.com/forums/index.php)
-   Full Timing in your Montana (http://www.montanaowners.com/forums/forumdisplay.php?f=29)
-   -   Satellite Service (http://www.montanaowners.com/forums/showthread.php?t=73336)

powerhaulic 10-25-2018 08:11 AM

Pathway X2 here as well, works great and a Wally

rohrmann 10-26-2018 07:19 PM

Just an update: Got our Trav'ler replaced this afternoon and was having issues getting connected to Dish. Found out that Dish issued an update to the Wally receivers, after a previous bad update, and with our satellite dish not working, missed the automatic update and with the help of a great fellow at Dish tech support, was able to get the system working again. So, anyone having an issue with their Wallys, give Dish a call and they can get you working again.

fatcatzzz 10-27-2018 07:19 AM

We recently had a Travler installed with Hopper 3 and Joey 3.0...……….LOVE IT!

chip27432 11-09-2018 06:54 PM

Who does that type of install? I’m looking for the same setup. TIA

powerhaulic 11-09-2018 08:18 PM

Quote:

Originally Posted by chip27432 (Post 1122914)
Who does that type of install? Iím looking for the same setup. TIA


Portable dish installs are super easy.
I ran my dedicated cable in a rear window till I was satisfied with the performance of the system.


After that I removed the fireplace and ran the cable up with the stock harness in the L.R. slide. Good digital cable and quality connectors and it's a piece of cake.


Want to make a camping trip to Daytona where we are till December, Ill do your install. :)

Frenchy 12-26-2018 08:56 PM

I used my DirecTV from our house after we moved out to live full time in the RV. I called direcTV to set up a move install. The tech was surprised it was not a house but was kind to still help install in the RV... here is what the tech and I did...

1- removed the main cable labeled SAT from the RV splitter as it creates too much resistance.

2- put it in the “input” new spitter that DirecTV tech provided.
3- found which cable went to what TV. Living room and bed room. And plugged them in the new splitter “out put”.
4- remove the dual connectors “ create resistance “ that are on the wall behind the TV. Used that cable directly in the main box(living room) and the cable in bedroom directly in the smaller box.
5- installed the SWM under the access compartment who also connects into the new splitter.
6- the tech gave me the flat roof set up that uses concrete blocks hold the dish but we left it on the ground pointed in the proper direction!
7- it all works!!!!


All times are GMT -6. The time now is 07:12 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.