Montana Owners Club - Keystone Montana 5th Wheel Forum

Montana Owners Club - Keystone Montana 5th Wheel Forum (http://www.montanaowners.com/forums/index.php)
-   It's a Dirty Job but Someone has to do it! (http://www.montanaowners.com/forums/forumdisplay.php?f=33)
-   -   furnace vent covers (http://www.montanaowners.com/forums/showthread.php?t=72276)

drjjj 10-23-2017 03:22 PM

furnace vent covers
 
Sometime back I remember reading about a way to make magnetic covers for the furnace floor vents to keep them clean when not in use. I believe it involved cutting a linoleum type floor tile to fit and glue to some type of magnetic sheet from an office supply store. I searched and could not find the thread. Also, how do you cover the small round furnace vent in the bathroom? TIA.

DQDick 10-23-2017 03:44 PM

You can buy magnetic vent covers on line, just go to Amazon and type in magnetic vent cover. I just insert ones that close from Loews and then take them out and put the others back in when winter comes.

carl n susan 10-23-2017 03:50 PM

I don;t recall anyone making a magnetic vent cover. But many have mentioned buying them. Look here:
http://www.montanaowners.com/forums/...d.php?p=613742

http://www.montanaowners.com/forums/...d.php?p=615421 post #24


beeje 10-23-2017 06:34 PM

I replaced ours with ones from HD/Lowes that close. They keep most of the debris out of the ductwork

cpaulsen 10-23-2017 08:27 PM

Quote:

Originally Posted by beeje (Post 1077609)
I replaced ours with ones from HD/Lowes that close. They keep most of the debris out of the ductwork

Same here plus added the magnetic covers,

TLightning 10-24-2017 09:56 AM

Lowes/HD sells magnetic vent covers.

Dbates111 10-24-2017 10:47 AM

New member
 
Iím new to the forum today and canít see where to post a question about my grey tank drains. I know this isnít it. Sorry

1retired06 10-24-2017 11:09 AM

Quote:

Originally Posted by beeje (Post 1077609)
I replaced ours with ones from HD/Lowes that close. They keep most of the debris out of the ductwork

Same here and they look better than OEM.

scottz 10-24-2017 11:43 AM

1 Attachment(s)
I bought this off Amazon, cut them to the correct size. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I got this stuff (like a thick contact paper) from Lowes or HD and covered the magnetic material. It is a close match to our floor.

timandsusan 10-25-2017 07:35 AM

Johnny, I don't think I showed you the vent cover in our bedroom. I can adjust the air flow from full open to closed. I did this because the furnace blower was very close and the air flow into the bedroom was to high for comfort. Easy replacement that I found at Home Depot--just measure your existing vents or take one with you.

Tim


All times are GMT -6. The time now is 11:16 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.